| Yeterlilik Kodu | TR0030006813 | |
| Yeterlilik Adı | Elektronik Teknolojisi Ön Lisans Diploması | |
| Sorumlu Kurum | Batman Üniversitesi | |
| Sorumlu Kurum İletişim Bilgisi | Yenişehir Mahallesi Batman Üniversitesi Batıraman Kampüsü 72000 Merkez Batman | |
| Sorumlu Kurum URL | https://www.batman.edu.tr/ | |
| Yönelim | Genel | |
| AYÇ Seviyesi | 5 | Yeterlilik TYÇ’ye yerleştirilmemiştir. |
| TYÇ Seviyesi | 5 | |
| Sınıflandırma (Tematik Alan) | Elektronik ve otomasyon | |
| Sınıflandırma (Meslek Kodu) | - | |
| Kategori | Ana | |
| Kredi Değeri | 120 | |
| Programın Normal Süresi | 2 | |
| Program Profili (Amaç) | Gün geçtikçe artan önemine paralel olarak, elektroniğin günlük hayattan sanayide kullanımına kadar çeşitli alanlardaki uygulamalarını kapsayan bir programdır. Elektroniğin temel ilkelerini açıklar ve uygulama alanlarına ait bilgiler kazandırır. | |
| Öğrenme Ortamları | - | |
| Öğrenme Kazanımları (Tanım) |
| |
| Anahtar Yetkinlikler | - | |
| Ölçme ve Değerlendirme Yöntemleri | - | |
| Kalite Güvencesi | - | |
| Giriş Şartı | - | |
| Başarma Şartları | Lise düzeyinde diplomaya sahip olmak.Öğrencinin bu programdan ön lisans derecesini alabilmesi için; Toplam 120 AKTS iş yükünü sağlaması, 30 gün staj yapması, programdaki tüm dersleri başarmış olması gerekir. | |
| İlerleme Yolları (İlişki Türü) | Elektronik Teknolojisi programından mezun olan öğrenciler kazandıkları yeterlikler doğrultusunda; elektronik, otomasyon ve bilişim sektöründe mal/hizmet üreten, küçük ve orta ölçekli işletmeler, sanayi kuruluşlarında ve kamu kurumlarında “Tekniker” olarak istihdam edilirler. Ayrıca bağımsız olarak da çalışabilirler. | |
| Yasal Dayanağı | - | |
| Geçerlilik Süresi (Varsa) | Yeterlilik sürekli geçerlidir. | |
| Yeterliliğe Erişim için İnternet Adresi | Adresi Aç | |
TR0030006813
Gün geçtikçe artan önemine paralel olarak, elektroniğin günlük hayattan sanayide kullanımına kadar çeşitli alanlardaki uygulamalarını kapsayan bir programdır. Elektroniğin temel ilkelerini açıklar ve uygulama alanlarına ait bilgiler kazandırır.
- İş güvenliğine uyarak elektronik cihazları kullanır ve temel ölçümleri yapar.
- Temel elektrik-elektronik devrelerini tasarlar ve çözer.
- Bilgisayar destekli devre tasarımı ve teknik çizim yapar.
- Temel analog ve dijital elektronik devrelerin analiz ve tasarımını yapar.
- Temel mikrokontrolör devreleri ve programlarının analiz ve tasarımını yapar.
- Temel elektronik devrelerin analiz, tasarımı ve arıza gidermesini yapar.
- Kontrol Cihazlarıyla(PLC, SCADA gibi), kumanda ve kontrol devrelerini çalıştırır.
- Elektrik motorlu sürücü sistemler ve güç elektroniği devrelerini çalıştırır.
- Kontrol sistemlerini çalıştırır ve algılayıcıları seçer.
- Etik değerlere uyarak kalite yönetimini işletmelerde uygular ve girişimde bulunur.
- Bilişim teknolojileri ile etkili iletişim kurar ve mesleki bilgilerini geliştirir.
- Elektromekanik taşıyıcılar, biyomedikal cihazlar, temel elektrik tesisatları, elektronik güvenlik sistemleri, ses ve görüntü sistemlerinin kurulum ve bakımlarını yapar.
Elektronik Teknolojisi programından mezun olan öğrenciler kazandıkları yeterlikler doğrultusunda; elektronik, otomasyon ve bilişim sektöründe mal/hizmet üreten, küçük ve orta ölçekli işletmeler, sanayi kuruluşlarında ve kamu kurumlarında “Tekniker” olarak istihdam edilirler. Ayrıca bağımsız olarak da çalışabilirler.
Yeterlilik sürekli geçerlidir.
| Qualification Code | TR0030006813 | |
| Qualification Title | Elektronik Teknolojisi Associate | |
| Awarding Body | Batman University | |
| Awarding Body Contact | ||
| Awarding Body Url | ||
| Orientation | General | |
| EQF Level | 5 | The Qualification hasn't been included in TQF. |
| TQF Level | 5 | |
| Thematic Areas | Electronics and automation | |
| National Occupation Classification | - | |
| Category | Main | |
| Credit Value | 120 | |
| Program Duration | 2 | |
| Program Profile | - | |
| Learning Environments | - | |
| Description | follows the use of electronic devices, which makes job security and basic measurementsdesigns and solve basic electrical-electronical circuitsmakes computer-aided circuit design and technical drawingmakes the analysis and design of basic analog and digital electronic circuitsmakes the analysis and design of basic microcontroller circuits and programsanalysis, design and fix the fault does of basic electronic circuits executes the command and control circuits of control devices (PLC, SCADA, etc.)runs an electric motor drive systems and power electronics circuitsto runs control systems and sensors selects compliance with ethical values ??and attempt to apply the quality management businesses includecommunicates effectively and improve their professional knowledge to information technologymakes installation and maintenance of electromechanical carriers, biomedical devices, basic electrical systems, electronic security systems, audio and video systems | |
| Key Competencies | - | |
| Further Info | Examination, assessment and grading procedure is mainly based on Batman University Education and Training Regulations for Associate and Undergraduate Degrees Depending on the nature of the course various instruments such as midterms, final exams, short exams, presentations, assignments, projects and applications may be involved in the assessment process of a semester on condition that students are informed about their weights upon registry. Contribution of these activities to final grading range 50%. So as to be eligible to take the final exam, a student has to fulfill the attendance requirement of 70% for theoretical and 80 % for practical courses. Once this requirement is fulfilled, attendance is not required again in case of a failure and retaking that course. Final grading of a course is determined on the basis of semester studies and final exam. Those with certified and officially approved excuses are also given a makeup exam. Please see the course structure page and click on the courses for more info on each course.To have a high school certificate | |
| Quality Assurance | - | |
| Access Requirements | Students are accepted to this program throught the university exam according to the framework of regulations set by The Council of Higher Education. Students who wish to enrol in the program have declared their preference according to composite scores obtained from a centralized exam and placed The Program by the SSPC (ÖSYM). Studens who gradute from vocational school from the relevant program are allowed to register to the relevant program without matriculation. Foreign students can register to The Program by The Council of Higher Education (YÖK). They have to take internationally recognized examinations. Exchange students acceptance to The Program are made within the framework of bilateral agreements. The acceptance of international exchange students is made thourogh The International Relations Unit, the acceptance of national exchange students is made thourogh The Farabi Exchange Unit and the acceptance of international students is made thourogh The Department of Student Afairs. | |
| Conditions for Success | To have a high school certificateThe students to take associate degree from this program; a) To provide a total workload of 120 ECTS, b) To do 30 days internship, c) All the courses must be succeed in the program | |
| Progression Paths (Relationship Type) | Graduates from this program can be employed as an technician in SME (KOBİ) or industrial organizations which have producing electronics, automation and informatik goods or services. Also they can run their own business. | |
| Legal Basis | - | |
| Validity Period (If Any) | Qualification is continuous | |
| Url | Open Address | |
TR0030006813
follows the use of electronic devices, which makes job security and basic measurementsdesigns and solve basic electrical-electronical circuitsmakes computer-aided circuit design and technical drawingmakes the analysis and design of basic analog and digital electronic circuitsmakes the analysis and design of basic microcontroller circuits and programsanalysis, design and fix the fault does of basic electronic circuits executes the command and control circuits of control devices (PLC, SCADA, etc.)runs an electric motor drive systems and power electronics circuitsto runs control systems and sensors selects compliance with ethical values ??and attempt to apply the quality management businesses includecommunicates effectively and improve their professional knowledge to information technologymakes installation and maintenance of electromechanical carriers, biomedical devices, basic electrical systems, electronic security systems, audio and video systems
Examination, assessment and grading procedure is mainly based on Batman University Education and Training Regulations for Associate and Undergraduate Degrees Depending on the nature of the course various instruments such as midterms, final exams, short exams, presentations, assignments, projects and applications may be involved in the assessment process of a semester on condition that students are informed about their weights upon registry. Contribution of these activities to final grading range 50%. So as to be eligible to take the final exam, a student has to fulfill the attendance requirement of 70% for theoretical and 80 % for practical courses. Once this requirement is fulfilled, attendance is not required again in case of a failure and retaking that course. Final grading of a course is determined on the basis of semester studies and final exam. Those with certified and officially approved excuses are also given a makeup exam. Please see the course structure page and click on the courses for more info on each course.To have a high school certificate
Students are accepted to this program throught the university exam according to the framework of regulations set by The Council of Higher Education. Students who wish to enrol in the program have declared their preference according to composite scores obtained from a centralized exam and placed The Program by the SSPC (ÖSYM). Studens who gradute from vocational school from the relevant program are allowed to register to the relevant program without matriculation. Foreign students can register to The Program by The Council of Higher Education (YÖK). They have to take internationally recognized examinations. Exchange students acceptance to The Program are made within the framework of bilateral agreements. The acceptance of international exchange students is made thourogh The International Relations Unit, the acceptance of national exchange students is made thourogh The Farabi Exchange Unit and the acceptance of international students is made thourogh The Department of Student Afairs.
Graduates from this program can be employed as an technician in SME (KOBİ) or industrial organizations which have producing electronics, automation and informatik goods or services. Also they can run their own business.
Qualification is continuous