Yeterlilik Kodu

TR0030003096

Yeterlilik Adı
Metalurji ve Malzeme Mühendisliği Lisans Diploması
Sorumlu KurumAlanya Alaaddin Keykubat Üniversitesi
Sorumlu Kurum İletişim BilgisiKestel Mahallesi Konya Çimento Caddesi No:80 Alanya Antalya/TÜRKİYE
Sorumlu Kurum URLhttps://www.alanya.edu.tr/
Yönelim-
AYÇ Seviyesi6
Yeterlilik TYÇ’ye yerleştirilmemiştir.
TYÇ Seviyesi 6
Sınıflandırma (Tematik Alan)Malzemeler (cam, kağıt, plastik ve ahşap)
Sınıflandırma (Meslek Kodu) -
Kategori-
Kredi Değeri-
Programın Normal Süresi -
Program Profili (Amaç)-
Öğrenme Ortamları-
Öğrenme Kazanımları (Tanım)
  • Matematik, fen ve mühendislik bilgilerini uygular.
  • Deney tasarlar, deney yapar, deney sonuçlarını analiz eder ve yorumlar.
  • İstenilen gereksinimi karşılayacak biçimde bir sistemi, parçayı ya da süreci tasarlar.
  • Disiplinler arası takımlarda çalışır.
  • Mühendislik problemlerini saptar, tanımlar ve çözer.
  • Mesleki ve etik sorumluluğun bilincindedir.
  • Etkin iletişim kurar.
  • Mühendislik çözümlerini, evrensel ve toplumsal boyutlarda etkilerini anlamak için gerekli genişlikte eğitim alır.
  • Yaşam boyu öğrenmenin gerekliliği, bilinci ve bunu gerçekleştirebilme becerisine sahiptir.
  • Çağın sorunlarını bilir.
  • Mühendislik uygulamaları için gerekli olan teknikleri ve modern araçları kullanır.
  • Proje tabanlı çalışma kültürünü benimsemiş mezunlar yetiştirir.
Anahtar Yetkinlikler -
Ölçme ve Değerlendirme Yöntemleri

Başarı notlarının ifade ettikleri başarı dereceleri ve katsayıları aşağıdaki tabloda gösterilmiştir: Not Harf Karşılığı Başarı Notu Harf Notu Katsayı 90-100 Mükemmel AA 4,00 80-89 Çok iyi BA 3,50 70-79 İyi BB 3,00 65-69 Orta CB 2,50 60-64 Yeterli CC 2,00 55-59 Şartlı Başarılı DC 1,50 50-54 Şartlı Başarılı DD 1,00 30-49 Başarısız FD 0,50 0-29 Başarısız FF 0,00 Başarısız (Devamsız) DZ 0,00

Kalite Güvencesi-
Giriş Şartı

Üniversiteye kayıt olabilmek için, ortaöğretim kurumlarından mezun olmak ve ön lisans ve lisans öğrenimiyle ilgili, ÖSYM'nin yaptığı sınavı kazanmış olmak; özel yetenek sınavı ile öğrenci kabul eden programlara kayıt olabilmek için ise özel yetenek sınavında başarılı olmak ve 2547 sayılı Yükseköğretim Kanununun 45 inci maddesi ve ilgili diğer mevzuatın aradığı koşulları taşımak gerekir.

 

Başarma ŞartlarıBir öğrencinin mezun olabilmesi için öğrenim süresi iki yıl olan ön lisans programlarında toplam 120 AKTS kredi, öğrenim süresi dört yıl olan lisans programlarında toplam 240 AKTS kredisini başarı ile tamamlaması zorunludur.
İlerleme Yolları (İlişki Türü)

Bölüm mezunları; otomotiv, elektronik, uçak, seramik, refrakter,cam, metal, madencilik, nükleer, inşaat, plastik, çimento ve boya sanayi alanlarında ve ayrıca üniversiteler ve AR-GE kuruluşlarında istihdam edilebilmektedir.

Yasal Dayanağı-
Geçerlilik Süresi (Varsa)

Yeterlilik sürekli geçerlidir.

Yeterliliğe Erişim için İnternet Adresi Adresi Aç
Yeterlilik Kodu

TR0030003096


Yeterlilik Adı
Metalurji ve Malzeme Mühendisliği Lisans Diploması

Sorumlu Kurum
Alanya Alaaddin Keykubat Üniversitesi

Sorumlu Kurum İletişim Bilgisi
Kestel Mahallesi Konya Çimento Caddesi No:80 Alanya Antalya/TÜRKİYE

Sorumlu Kurum URL

Yönelim
-

Sınıflandırma (Meslek Kodu)
-

AYÇ Seviyesi
6

TYÇ Seviyesi
6
Yeterlilik TYÇ’ye yerleştirilmemiştir.

Sınıflandırma (Meslek Kodu)
-

Kategori
-

Kredi Değeri
-

Programın Normal Süresi
-

Program Profili (Amaç)
-

Öğrenme Ortamları
-

Öğrenme Kazanımları (Tanım)
  • Matematik, fen ve mühendislik bilgilerini uygular.
  • Deney tasarlar, deney yapar, deney sonuçlarını analiz eder ve yorumlar.
  • İstenilen gereksinimi karşılayacak biçimde bir sistemi, parçayı ya da süreci tasarlar.
  • Disiplinler arası takımlarda çalışır.
  • Mühendislik problemlerini saptar, tanımlar ve çözer.
  • Mesleki ve etik sorumluluğun bilincindedir.
  • Etkin iletişim kurar.
  • Mühendislik çözümlerini, evrensel ve toplumsal boyutlarda etkilerini anlamak için gerekli genişlikte eğitim alır.
  • Yaşam boyu öğrenmenin gerekliliği, bilinci ve bunu gerçekleştirebilme becerisine sahiptir.
  • Çağın sorunlarını bilir.
  • Mühendislik uygulamaları için gerekli olan teknikleri ve modern araçları kullanır.
  • Proje tabanlı çalışma kültürünü benimsemiş mezunlar yetiştirir.

Anahtar Yetkinlikler
-

Ölçme ve Değerlendirme Yöntemleri

Başarı notlarının ifade ettikleri başarı dereceleri ve katsayıları aşağıdaki tabloda gösterilmiştir: Not Harf Karşılığı Başarı Notu Harf Notu Katsayı 90-100 Mükemmel AA 4,00 80-89 Çok iyi BA 3,50 70-79 İyi BB 3,00 65-69 Orta CB 2,50 60-64 Yeterli CC 2,00 55-59 Şartlı Başarılı DC 1,50 50-54 Şartlı Başarılı DD 1,00 30-49 Başarısız FD 0,50 0-29 Başarısız FF 0,00 Başarısız (Devamsız) DZ 0,00


Kalite Güvencesi
-

Giriş Şartı

Üniversiteye kayıt olabilmek için, ortaöğretim kurumlarından mezun olmak ve ön lisans ve lisans öğrenimiyle ilgili, ÖSYM'nin yaptığı sınavı kazanmış olmak; özel yetenek sınavı ile öğrenci kabul eden programlara kayıt olabilmek için ise özel yetenek sınavında başarılı olmak ve 2547 sayılı Yükseköğretim Kanununun 45 inci maddesi ve ilgili diğer mevzuatın aradığı koşulları taşımak gerekir.

 


Başarma Şartları
Bir öğrencinin mezun olabilmesi için öğrenim süresi iki yıl olan ön lisans programlarında toplam 120 AKTS kredi, öğrenim süresi dört yıl olan lisans programlarında toplam 240 AKTS kredisini başarı ile tamamlaması zorunludur.

İlerleme Yolları (İlişki Türü)

Bölüm mezunları; otomotiv, elektronik, uçak, seramik, refrakter,cam, metal, madencilik, nükleer, inşaat, plastik, çimento ve boya sanayi alanlarında ve ayrıca üniversiteler ve AR-GE kuruluşlarında istihdam edilebilmektedir.


Yasal Dayanağı
-

Geçerlilik Süresi (Varsa)

Yeterlilik sürekli geçerlidir.


Yeterliliğe Erişim için İnternet Adresi
Adresi Aç

Qualification Code

TR0030003096

Qualification Title
Metallurgy and Materials Engineering Undergraduate Diploma
Awarding BodyAlanya Alaaddin Keykubat University
Awarding Body Contact
Awarding Body Urlhttps://www.alanya.edu.tr/
Orientation-
EQF Level6
The Qualification hasn't been included in TQF.
TQF Level 6
Thematic AreasMaterials (glass, paper, plastic and wood)
National Occupation Classification -
Category-
Credit Value-
Program Duration-
Program Profile-
Learning Environments-
Description

The person with this qualification;

  • The skill to apply math,science and engineering knowladge.
  • The ability to design experiments, do experiments, to analyse experiment results and interpret the results.
  • The ability to design a process or a product to meet the requirements.
  • The ability to work in inter-disiplinary teams.
  • To define and solve engineering problems.
  • Professional and ethical responsibility consciousness
  • The ability to establish effective communication.
  • Wide knowladge enough to understand engineering solutions, and to understand the universal and social effects.
  • The requirement of life-long education, consciousness and skill to make it happen.
  • Information about daily problems.
  • The ability to use techniques and modern tools used for engineering applications.
  • Graduates who have awareness of project-based work culture.
Key Competencies-
Further Info

(1) In associate degree and bachelors degree education and training, the student success is determined by the relative evaluation method. This assessment is based on the success in the work and final exam. It is determined by considering the general success level.

(2) Success in a course is determined by the grade of success. Meaning of success grade letters. It is as follows:

    a) A course (AA), (BA), (BB), (CB) and (CC) students who have taken one of the grades counted.

    b) Students who take one of the (DC) and (DD) grades from a course are considered conditionally successful.

    c) A student who receives a (FD) or (FF) grade from a course is considered unsuccessful.

    d) A student who receives a (VF) grade from a course cannot take the final exam and is considered unsuccessful.

(3) Other letters used in addition to success grade letters have the following meanings:

    a) BL: Non-credit course.

    b) BZ: Non-credit course failed.

    c) T: In the second and third paragraph of article 17 of a course where the students are registered is a sign indicating that they have been withdrawn within the specified period.

    d) E: Project, graduation project / finishing design project and similar studies, determined work given to the student who can not finish in time. Teaching when the study will be completed determined by the element. Students who cannot complete their studies in the specified period are given FF grade.

(4) (Amended: RG-20/9 / 2018-30541 Duplicate) Success grades expressed by success grades and coefficients are shown in the following table: Note Letter to return Success Grade Letter grade Coefficient 90-100 Perfect AA 4.00 Very good BA 3,50 Good BB 3.00 65-69 Medium CB 2.50 60-64 Adequate CC 2,00 55-59 Conditionally successful DC 1.50 50-54 Conditionally Successful DD 1.00 30-49 Failed FD 0.50 0-29 Failed FF 0.00 Unsuccessful (Uninterrupted) DZ 0,00

(5) (Amended: RG-20/9 / 2018-30541 Duplicate) Success grade evaluation with raw achievement grade the distribution of grades and class by taking into account the overall level of achievement of the class based on the relative evaluation system considering the average. Not a final exam students are given FF grade. The principles of relative evaluation are regulated by the Senate. It has been determined that the total average of the credits completed in the Faculty of Economics and Administrative Sciences Curriculum in the Associate and Undergraduate Education and Examination Regulations of the University is at least 240 ECTS students are entitled to a bachelors degree from our faculty.

Quality Assurance-
Access Requirements

(1) In order to register to the University,to have passed the exam made by ÖSYM about undergraduate and undergraduate education; student with special ability exam to be successful in the special talent exam and 2547 The provisions of Article 45 of the Higher Education Law and other relevant legislation should be met.

(2) Students who complete their secondary education abroad with foreign students to students, units in accordance with Article 45 (1) of the first paragraph of Law No. 2547 the conditions specified by the Council of Higher Education and Senate for registration the conditions required by the legislation.

(3) The originals of the documents required for final registration from the applicants or the sample approved by the University upon the submission of the originals. For exact registration fake or falsified documents, false statements or university entrance exams the registration of his / her determined person is canceled as of the registration date and legal procedures Starts. If this person leaves the University, all documents including diploma given to him / her shall be canceled. This student contribution and / or tuition fees paid by the individuals are not reimbursed.

(4) Students of the programs to be organized jointly by the university with a university abroad registration procedures are carried out according to the provisions of the legislation and the Senate decisions.

(5) Guidelines for students enrolled in English language programs below It states:

      a) They take the English Proficiency Test which is organized by the University and announced as the date. Autumn national and international until the date of the exams, those who document that they are successful at the level determined by the Senate. Those who are successful in one of the English language proficiency examinations with the decision of the board of undergraduate students and begin their undergraduate education. 

     b) Students who fail or do not participate in the examinations They enroll in the Department of Foreign Languages and continue their English preparatory program. This at the end of the academic year, including summer education, the right to begin teaching in the relevant unit students may take all English proficiency exams at the beginning of the next academic year. Most successful English proficiency exam at the beginning of late fall begin their studies. Students who fail in these exams prepare their English for the second time they do not have the right to continue their education. In the same academic year, these students In all the English language proficiency exams, They enter. End of summer education is the final right. With this program, students who fail disconnects.

     c) Students who fail in the said exams, if they wish, are numbered 29662 and dated 23/3/2016. Foreign Language Education and Foreign Languages ??in Higher Education Institutions published in the Official Gazette Pursuant to Article 9 of the By-Law on the Principles to be Followed in Education, English apply for transfer to programs where teaching is not compulsory.

(6) If the language of instruction is at least 30% English entered the universitys same level of associate degree and undergraduate program English proficiency is not required for students.

(7) Student candidates who do not complete their admission to the university within the due period, They are deprived of the right to be a university student and cannot claim any rights.

(8) The application principles of English preparatory instruction are determined by the Senate.

(9) The works and transactions related to the recruitment of students from abroad are carried out by the Senate.

(10) (Amended: RG-20/9 / 2018-30541 Duplicate) Previously studied universities The students who want to be exempted from the courses In the first two weeks of instruction, they apply to the related departments. Made after this date applications are not processed. Adjustment procedures are evaluated by the relevant adjustment commission and the unit management is decided upon. Students who are exempted from the course, the third week in which the courses begin can add / subtract until the end of the course.

(11) Acceptance requirements and final registration procedures of the students to be taken with special ability exam is prepared and determined by the Senate.

(12) Specific student admission requirements and final registration procedures are determined by the Senate.

Conditions for SuccessStudents who have successfully completed all the courses in the Faculty of Economics curriculum and whose GPA is at least 2.00 out of 4.00 and completed a total of at least 240 ECTS credits in the Undergraduate and Graduate Education and Training Regulations They are entitled to obtain a bachelors degree from our faculty. (1) Required courses shown in the curriculum completion of elective courses and internships to provide a total of ECTS credits projects, including DD and DC grades, a minimum of 2.00 level students; have completed all the work including the internships specified in this Regulation and 100% of the credits taken in English program, except the compulsory courses in Turkish, all in English students who have completed their studies and have completed their studies / have been considered to have completed themselves given the specified diploma. 100% English for students who transfer to English program to complete / complete their studies in terms of only the courses in the transition program taking (2) Those who have completed the programs they have enrolled in are as follows: laboratory work, graduation project / finishing design project and similar studies, success grades and weighted average grade point average, oversight, good status, honor and high honor is given a learning certificate / transcript. (3) (Amended: RG-20/9 / 2018-30541 Duplicate) Learning for a student to graduate in two-year associate degree programs with a total of 120 ECTS credit hours 240 ECTS credits must be successfully completed.
Progression Paths (Relationship Type)

Graduates may work in fields such as automotive, electronics, aviation, ceramics, glass, metal, mining, nuclear, construction, plastics, concrete and dye as well as in universities and R&D institutes.

Legal Basis-
Validity Period (If Any)

Qualification is continuous.

Url Open Address
Qualification Code

TR0030003096


Qualification Title
Metallurgy and Materials Engineering Undergraduate Diploma

Awarding Body
Alanya Alaaddin Keykubat University

Awarding Body Contact

Awarding Body Url

Orientation
-

National Occupation Classification
-

EQF Level
6

TQF Level
6
The Qualification hasn't been included in TQF.

National Occupation Classification
-

Category
-

Credit Value
-

Program Duration
-

Program Profile
-

Learning Environments
-

Description

The person with this qualification;

  • The skill to apply math,science and engineering knowladge.
  • The ability to design experiments, do experiments, to analyse experiment results and interpret the results.
  • The ability to design a process or a product to meet the requirements.
  • The ability to work in inter-disiplinary teams.
  • To define and solve engineering problems.
  • Professional and ethical responsibility consciousness
  • The ability to establish effective communication.
  • Wide knowladge enough to understand engineering solutions, and to understand the universal and social effects.
  • The requirement of life-long education, consciousness and skill to make it happen.
  • Information about daily problems.
  • The ability to use techniques and modern tools used for engineering applications.
  • Graduates who have awareness of project-based work culture.

Key Competencies
-

Further Info

(1) In associate degree and bachelors degree education and training, the student success is determined by the relative evaluation method. This assessment is based on the success in the work and final exam. It is determined by considering the general success level.

(2) Success in a course is determined by the grade of success. Meaning of success grade letters. It is as follows:

    a) A course (AA), (BA), (BB), (CB) and (CC) students who have taken one of the grades counted.

    b) Students who take one of the (DC) and (DD) grades from a course are considered conditionally successful.

    c) A student who receives a (FD) or (FF) grade from a course is considered unsuccessful.

    d) A student who receives a (VF) grade from a course cannot take the final exam and is considered unsuccessful.

(3) Other letters used in addition to success grade letters have the following meanings:

    a) BL: Non-credit course.

    b) BZ: Non-credit course failed.

    c) T: In the second and third paragraph of article 17 of a course where the students are registered is a sign indicating that they have been withdrawn within the specified period.

    d) E: Project, graduation project / finishing design project and similar studies, determined work given to the student who can not finish in time. Teaching when the study will be completed determined by the element. Students who cannot complete their studies in the specified period are given FF grade.

(4) (Amended: RG-20/9 / 2018-30541 Duplicate) Success grades expressed by success grades and coefficients are shown in the following table: Note Letter to return Success Grade Letter grade Coefficient 90-100 Perfect AA 4.00 Very good BA 3,50 Good BB 3.00 65-69 Medium CB 2.50 60-64 Adequate CC 2,00 55-59 Conditionally successful DC 1.50 50-54 Conditionally Successful DD 1.00 30-49 Failed FD 0.50 0-29 Failed FF 0.00 Unsuccessful (Uninterrupted) DZ 0,00

(5) (Amended: RG-20/9 / 2018-30541 Duplicate) Success grade evaluation with raw achievement grade the distribution of grades and class by taking into account the overall level of achievement of the class based on the relative evaluation system considering the average. Not a final exam students are given FF grade. The principles of relative evaluation are regulated by the Senate. It has been determined that the total average of the credits completed in the Faculty of Economics and Administrative Sciences Curriculum in the Associate and Undergraduate Education and Examination Regulations of the University is at least 240 ECTS students are entitled to a bachelors degree from our faculty.


Quality Assurance
-

Access Requirements

(1) In order to register to the University,to have passed the exam made by ÖSYM about undergraduate and undergraduate education; student with special ability exam to be successful in the special talent exam and 2547 The provisions of Article 45 of the Higher Education Law and other relevant legislation should be met.

(2) Students who complete their secondary education abroad with foreign students to students, units in accordance with Article 45 (1) of the first paragraph of Law No. 2547 the conditions specified by the Council of Higher Education and Senate for registration the conditions required by the legislation.

(3) The originals of the documents required for final registration from the applicants or the sample approved by the University upon the submission of the originals. For exact registration fake or falsified documents, false statements or university entrance exams the registration of his / her determined person is canceled as of the registration date and legal procedures Starts. If this person leaves the University, all documents including diploma given to him / her shall be canceled. This student contribution and / or tuition fees paid by the individuals are not reimbursed.

(4) Students of the programs to be organized jointly by the university with a university abroad registration procedures are carried out according to the provisions of the legislation and the Senate decisions.

(5) Guidelines for students enrolled in English language programs below It states:

      a) They take the English Proficiency Test which is organized by the University and announced as the date. Autumn national and international until the date of the exams, those who document that they are successful at the level determined by the Senate. Those who are successful in one of the English language proficiency examinations with the decision of the board of undergraduate students and begin their undergraduate education. 

     b) Students who fail or do not participate in the examinations They enroll in the Department of Foreign Languages and continue their English preparatory program. This at the end of the academic year, including summer education, the right to begin teaching in the relevant unit students may take all English proficiency exams at the beginning of the next academic year. Most successful English proficiency exam at the beginning of late fall begin their studies. Students who fail in these exams prepare their English for the second time they do not have the right to continue their education. In the same academic year, these students In all the English language proficiency exams, They enter. End of summer education is the final right. With this program, students who fail disconnects.

     c) Students who fail in the said exams, if they wish, are numbered 29662 and dated 23/3/2016. Foreign Language Education and Foreign Languages ??in Higher Education Institutions published in the Official Gazette Pursuant to Article 9 of the By-Law on the Principles to be Followed in Education, English apply for transfer to programs where teaching is not compulsory.

(6) If the language of instruction is at least 30% English entered the universitys same level of associate degree and undergraduate program English proficiency is not required for students.

(7) Student candidates who do not complete their admission to the university within the due period, They are deprived of the right to be a university student and cannot claim any rights.

(8) The application principles of English preparatory instruction are determined by the Senate.

(9) The works and transactions related to the recruitment of students from abroad are carried out by the Senate.

(10) (Amended: RG-20/9 / 2018-30541 Duplicate) Previously studied universities The students who want to be exempted from the courses In the first two weeks of instruction, they apply to the related departments. Made after this date applications are not processed. Adjustment procedures are evaluated by the relevant adjustment commission and the unit management is decided upon. Students who are exempted from the course, the third week in which the courses begin can add / subtract until the end of the course.

(11) Acceptance requirements and final registration procedures of the students to be taken with special ability exam is prepared and determined by the Senate.

(12) Specific student admission requirements and final registration procedures are determined by the Senate.


Conditions for Success
Students who have successfully completed all the courses in the Faculty of Economics curriculum and whose GPA is at least 2.00 out of 4.00 and completed a total of at least 240 ECTS credits in the Undergraduate and Graduate Education and Training Regulations They are entitled to obtain a bachelors degree from our faculty. (1) Required courses shown in the curriculum completion of elective courses and internships to provide a total of ECTS credits projects, including DD and DC grades, a minimum of 2.00 level students; have completed all the work including the internships specified in this Regulation and 100% of the credits taken in English program, except the compulsory courses in Turkish, all in English students who have completed their studies and have completed their studies / have been considered to have completed themselves given the specified diploma. 100% English for students who transfer to English program to complete / complete their studies in terms of only the courses in the transition program taking (2) Those who have completed the programs they have enrolled in are as follows: laboratory work, graduation project / finishing design project and similar studies, success grades and weighted average grade point average, oversight, good status, honor and high honor is given a learning certificate / transcript. (3) (Amended: RG-20/9 / 2018-30541 Duplicate) Learning for a student to graduate in two-year associate degree programs with a total of 120 ECTS credit hours 240 ECTS credits must be successfully completed.

Progression Paths (Relationship Type)

Graduates may work in fields such as automotive, electronics, aviation, ceramics, glass, metal, mining, nuclear, construction, plastics, concrete and dye as well as in universities and R&D institutes.


Legal Basis
-

Validity Period (If Any)

Qualification is continuous.


Url
Open Address