| Yeterlilik Kodu | TR0030016182 | |
| Yeterlilik Adı | Mekatronik Ön Lisans Diploması | |
| Sorumlu Kurum | Başkent Üniversitesi | |
| Sorumlu Kurum İletişim Bilgisi | Bağlıca Kampüsü Fatih Sultan Mahallesi Eskişehir Yolu 18.km TR 06790 Etimesgut Ankara | |
| Sorumlu Kurum URL | https://www.baskent.edu.tr | |
| Yönelim | Genel | |
| AYÇ Seviyesi | 5 | Yeterlilik TYÇ’ye yerleştirilmemiştir. |
| TYÇ Seviyesi | 5 | |
| Sınıflandırma (Tematik Alan) | Mekanik ve metal ticareti | |
| Sınıflandırma (Meslek Kodu) |
- | |
| Kategori | Ana | |
| Kredi Değeri | 120 | |
| Programın Normal Süresi | 2 | |
| Program Profili (Amaç) | Mekatronik Programı sektörün değişen ve gelişen ihtiyacını karşılayacak nitelikte mekatronik elemanı olarak çalışabilecek uzman işgücü yetiştirmeyi hedeflemektedir. | |
| Öğrenme Ortamları | - | |
| Öğrenme Kazanımları (Tanım) |
| |
| Anahtar Yetkinlikler | - | |
| Ölçme ve Değerlendirme Yöntemleri | - | |
| Kalite Güvencesi | - | |
| Giriş Şartı | - | |
| Başarma Şartları | Dört yarıyıllık önlisans programlarını tamamlayan öğrencilere önlisans diploması verilir. Ayrıca, herhangi bir lisans programına kayıtlı öğrencilerden isteyenlere, ilk dört yarıyıl derslerini en az 2,00 GNO ile tamamlamış olmaları ve ilk dört yarıyıl derslerinden en az D notu almış olmaları koşuluyla, önlisans diploması ve diploma eki verilir. | |
| İlerleme Yolları (İlişki Türü) | Mezunlar kamu ve özel işletmelerin departmanlarında istihdam edilmektedirler. | |
| Yasal Dayanağı | - | |
| Geçerlilik Süresi (Varsa) | Yeterlilik sürekli geçerlidir | |
| Yeterliliğe Erişim için İnternet Adresi | Adresi Aç | |
TR0030016182
-
-
Mekatronik Programı sektörün değişen ve gelişen ihtiyacını karşılayacak nitelikte mekatronik elemanı olarak çalışabilecek uzman işgücü yetiştirmeyi hedeflemektedir.
- Ortaöğretim düzeyinde kazanılan yeterliliklere dayalı olarak alanındaki güncel teorik alan bilgilerini uygulamada kullanabilmektedir.
- Gereksinimleri karşılayacak biçimde bir süreci yönetmektedir.
- Disiplinler arası da dahil takımlarda çalışmaktadır.
- Mesleki uygulamada problemleri tanımlama ve çözmektedir.
- Mesleki etik ve sorumluluk sahibi olmaktadır.
- Yaşam boyu öğrenmenin gerekliliği bilincine sahip olma ve bunu gerçekleştirebilmektedir.
- Sektörel sorunlar hakkında bilgi sahibi olabilmektedir.
- Mesleki yasal mevzuatı anlayabilme ve uygulamaktadır.
- Etkin iletişim kurmaktadır.
- Bilgi ve iletişim teknolojisi araçları ile diğer mesleki araçları ve teknikleri kullanabilmektedir.
- Mesleki süreçleri planlama ve uygulamaktadır.
- Mesleki özgüvene sahiptir.
- Girişimcilik ruhuna sahiptir
- Sosyal, kültürel ve toplumsal sorumlulukları kavrama, benimseme ve uygulamaktadır.
Mezunlar kamu ve özel işletmelerin departmanlarında istihdam edilmektedirler.
Yeterlilik sürekli geçerlidir
| Qualification Code | TR0030016182 | |
| Qualification Title | PROGRAM OF MECHATRONICS Associate Degree | |
| Awarding Body | Başkent University | |
| Awarding Body Contact | Bağlıca Kampüsü Fatih Sultan Mahallesi Eskişehir Yolu 18.km TR 06790 Etimesgut Ankara | |
| Awarding Body Url | https://www.baskent.edu.tr/en/ | |
| Orientation | General | |
| EQF Level | 5 | The Qualification hasn't been included in TQF. |
| TQF Level | 5 | |
| Thematic Areas | Mechanics and metal trades | |
| National Occupation Classification |
- | |
| Category | Main | |
| Credit Value | - | |
| Program Duration | - | |
| Program Profile | - | |
| Learning Environments | - | |
| Description | - | |
| Key Competencies | - | |
| Further Info | For each course taken, a student shall be given one of the following letter grades. The letter grades and their coefficients are as follows: Grade Coefficient A 4.0 A- 3.7 B+ 3.3 B 3.0 B- 2.7 C+ 2.3 C 2.0 C- 1.7 D+ 1.3 D 1.0 F1 0.0 F2 0.0 Students, whose work practice for a course is lacking or who have not been given a grade within the grading period since they are to take a make-up examination, shall be given the grade E. A student who has been given the grade E, must, after having completed the lacking work practice if there be any, take the make-up examination within the ten days following the announcement of the grades. The decision for the extension of this period shall be made by the administrative committee of the respective unit. The E grades that have not been extended by the unit administrative committee or replaced by other grades within a fortnight shall turn automatically into F1 grades. The grade S shall be given for the work practice done or any applied course taken outside the semester academic calendar. Upon the resolution of the unit administrative committee and by the end at the latest of the add-drop period of the ensuing academic year, this grade must be replaced by one of the usual achievement grades. | |
| Quality Assurance | - | |
| Access Requirements | All high school graduates are required to take the transition to higher education examination(YGS), which is administered by Assessment Selection and Placement Center Presidency. The graduates from departments of Vocational and Technical Secondary Education Institutions determined by Assessment Selection and Placement Center can come up Foreign Trade Program with an additional score and those who graduated from the departments except the specified area or those who graduated from high school can be placed with the score of YGS 1. | |
| Conditions for Success | Students who have completed their four semester associate degree programmes shall be granted the Associate Degree. Also the students, who have registered for a Bachelor?s Degree programme, may be granted, upon their request in writing, the Associate Degree and its supplements on condition that they have achieved with minimum 2.00 GPA all the courses of the first four semesters and received minimum the grade D in all of them. All the procedures for granting the Associate Degree to the students registered for the Bachelor?s Degree or the transfer of such students to vocational schools shall be completed in accordance with the resolutions adopted by the Higher Education Council. | |
| Progression Paths (Relationship Type) | Graduates are employed in the departments of public and private organizations. | |
| Legal Basis | - | |
| Validity Period (If Any) | Qualification is continuous | |
| Url | Open Address | |
TR0030016182
-
-
For each course taken, a student shall be given one of the following letter grades. The letter grades and their coefficients are as follows: Grade Coefficient A 4.0 A- 3.7 B+ 3.3 B 3.0 B- 2.7 C+ 2.3 C 2.0 C- 1.7 D+ 1.3 D 1.0 F1 0.0 F2 0.0 Students, whose work practice for a course is lacking or who have not been given a grade within the grading period since they are to take a make-up examination, shall be given the grade E. A student who has been given the grade E, must, after having completed the lacking work practice if there be any, take the make-up examination within the ten days following the announcement of the grades. The decision for the extension of this period shall be made by the administrative committee of the respective unit. The E grades that have not been extended by the unit administrative committee or replaced by other grades within a fortnight shall turn automatically into F1 grades. The grade S shall be given for the work practice done or any applied course taken outside the semester academic calendar. Upon the resolution of the unit administrative committee and by the end at the latest of the add-drop period of the ensuing academic year, this grade must be replaced by one of the usual achievement grades.
All high school graduates are required to take the transition to higher education examination(YGS), which is administered by Assessment Selection and Placement Center Presidency. The graduates from departments of Vocational and Technical Secondary Education Institutions determined by Assessment Selection and Placement Center can come up Foreign Trade Program with an additional score and those who graduated from the departments except the specified area or those who graduated from high school can be placed with the score of YGS 1.
Graduates are employed in the departments of public and private organizations.
Qualification is continuous