| Yeterlilik Kodu | TR0030010692 | |
| Yeterlilik Adı | Makine Ön Lisans Diploması | |
| Sorumlu Kurum | Atatürk Üniversitesi | |
| Sorumlu Kurum İletişim Bilgisi | Atatürk Üniversitesi Rektörlüğü Üniversite Mahallesi Prof. Dr. Hikmet Koçak Sokak No : 8 P.K : 25050 Yakutiye / Erzurum | |
| Sorumlu Kurum URL | http://www.atauni.edu.tr/ | |
| Yönelim | Genel | |
| AYÇ Seviyesi | 5 | Yeterlilik TYÇ’ye yerleştirilmemiştir. |
| TYÇ Seviyesi | 5 | |
| Sınıflandırma (Tematik Alan) | Mekanik ve metal ticareti | |
| Sınıflandırma (Meslek Kodu) | - | |
| Kategori | Ana | |
| Kredi Değeri | 120 | |
| Programın Normal Süresi | 2 | |
| Program Profili (Amaç) | - | |
| Öğrenme Ortamları | - | |
| Öğrenme Kazanımları (Tanım) |
| |
| Anahtar Yetkinlikler | - | |
| Ölçme ve Değerlendirme Yöntemleri | - | |
| Kalite Güvencesi | - | |
| Giriş Şartı | Atatürk Üniversitesi Erzurum Meslek Yüksekokulu Programlarına; Yükseköğretim Kurulu Ölçme Seçme ve Yerleştirme Merkezi tarafından yapılan sınav sonucunda YGS-1 puan türünde yeterli puanı almış ve özel şartları taşıyan öğrenciler alınmaktadır. | |
| Başarma Şartları | Öğrencilerin Atatürk Üniversitesi Erzurum Meslek Yüksekokulundan mezun olabilmeleri için öğretim programında belirtilen dersleri ve kredi saatlerini (minimum 100 ders saati veya 120 AKTS) başarıyla tamamlamaları, ağırlıklı genel not ortalamasını en az 2.00 düzeyine çıkarmaları, 30 iş günü staj çalışmalarında başarılı olmaları gerekmektedir. | |
| İlerleme Yolları (İlişki Türü) | - | |
| Yasal Dayanağı | - | |
| Geçerlilik Süresi (Varsa) | Yeterlilik sürekli geçerlidir. | |
| Yeterliliğe Erişim için İnternet Adresi | Adresi Aç | |
TR0030010692
- Mesleğinde Matematik ve fizik ilgili uygulamalar yapmak.
- Bilişim imkânlarını kullanarak kendini geliştirmek.
- Bireysel ve örgütsel iletişim kurmak.
- Teknik ve mesleki resim çizmek ve okumak.
- Bilgisayar destekli iki-üç boyutlu çizim ve montaj yapmak.
- Temel ve ileri seviyede imalat işlemleri yapmak.
- CNC tornada kontrol panelini ve CAM programlarını kullanarak üretim yapmak.
- Makine elemanlarını boyutlandırmak ve kontrol hesapları yapmak.
- Temel ısıl işlemleri uygulamak.
- Temel düzeyde kaynak işlemleri yapmak.
- Hidrolik ve pnömatik devre şeması oluşturmak ve kurmak.
- Hidrolik ve pnömatik sistemlerin bakımı, arıza tespiti ve onarımını yapmak.
- Sistem analizi ve tasarımı yapmak.Kalite yönetim sistemi oluşturmak ve istatistiksel kalite kontrol uygulamaları yapmak.
- İşletmeyi yönetmek.
- Temel ısıl işlemleri uygulamak.
- Ortaöğretim düzeyinde kazanılan yeterliliklere dayalı olarak alanındaki güncel bilgileri içeren ders kitapları, uygulama araçgereçleri ve diğer kaynaklarla desteklenen temel düzeydeki kuramsal ve uygulamalı bilgilere sahip olma.
Atatürk Üniversitesi Erzurum Meslek Yüksekokulu Programlarına; Yükseköğretim Kurulu Ölçme Seçme ve Yerleştirme Merkezi tarafından yapılan sınav sonucunda YGS-1 puan türünde yeterli puanı almış ve özel şartları taşıyan öğrenciler alınmaktadır.
Yeterlilik sürekli geçerlidir.
| Qualification Code | TR0030010692 | |
| Qualification Title | Machinery | |
| Awarding Body | Atatürk University | |
| Awarding Body Contact | Atatürk University | |
| Awarding Body Url | http://www.atauni.edu.tr/ | |
| Orientation | General | |
| EQF Level | 5 | The Qualification hasn't been included in TQF. |
| TQF Level | 5 | |
| Thematic Areas | Mechanics and metal trades | |
| National Occupation Classification | - | |
| Category | Main | |
| Credit Value | - | |
| Program Duration | - | |
| Program Profile | - | |
| Learning Environments | - | |
| Description | - | |
| Key Competencies | - | |
| Further Info | A midterm and a final exam is given for each course carried out in the programs. The effect of Midterm exam (quiz, project and homework) to success grade is 40 % and the effect of final exam is 60 %. Students must attend courses and fulfill attending requirements of the regulations in order to have final exams. All exams are evaluated over 100 points. Relative evaluation system is applied for evaluating students success grade . In this evaluation, the course instructor takes in to consideration the statistical result of grades that students attending courses take from midterm, year in and year end exams and these results are converted to letter as system with four under the terms defined in the instruction. If students WGPA consisting of grades which students take is under 2 in successive two terms, they can’t take any courses in the next term. If a student takes AA, BA, BB, CB and CC from a course, he/she can be accepted as successful. DC and DD grades taken from a course are evaluated in terms of depending on students granduation of WGPA. If a student’s WGPA is over success grade , these courses are defined as successful, but in midterm and year in or enr, this letter grades are evaluated with their coefficients in the calculation of WGPA. FF grade is given to students who fail the course in question. Student who takes FF grade must meet conditions dealing with attending and exam by taking this course in the first semester or year. Success grade of courses, referred to as M and G isn’t included in the calculation of WGPA. | |
| Quality Assurance | - | |
| Access Requirements | Students who graduate Vocational high-school are admitted to Atatürk University Erzurum Vocational College without exam but students who graduate other high-schools are admitted according to the result of examination which is performed by selection and Placement Center of higher-education and these students must get type 1-point sufficiently and they must have special requirements. Also , students are admitted to the programs through horizontal transfer. These transitions are regulated by an instruction students can make transition under the number and transition conditions which were pre-announced before and they can realize this procedure between diploma programs of different higher-education foundations or diploma programs within the same higher-education. | |
| Conditions for Success | It is necessary that students can be successful from the courses defined in teaching program and can complete credit hours (a minimum of 100 teaching hours or 120 ECTS) successfully and get at least 2.00 weighted GPA and also they must be successful for their 30 day-training in order that they can graduate Atatürk University Erzurum Vocational College. | |
| Progression Paths (Relationship Type) | - | |
| Legal Basis | - | |
| Validity Period (If Any) | - | |
| Url | Open Address | |
TR0030010692
A midterm and a final exam is given for each course carried out in the programs. The effect of Midterm exam (quiz, project and homework) to success grade is 40 % and the effect of final exam is 60 %. Students must attend courses and fulfill attending requirements of the regulations in order to have final exams. All exams are evaluated over 100 points. Relative evaluation system is applied for evaluating students success grade . In this evaluation, the course instructor takes in to consideration the statistical result of grades that students attending courses take from midterm, year in and year end exams and these results are converted to letter as system with four under the terms defined in the instruction. If students WGPA consisting of grades which students take is under 2 in successive two terms, they can’t take any courses in the next term. If a student takes AA, BA, BB, CB and CC from a course, he/she can be accepted as successful. DC and DD grades taken from a course are evaluated in terms of depending on students granduation of WGPA. If a student’s WGPA is over success grade , these courses are defined as successful, but in midterm and year in or enr, this letter grades are evaluated with their coefficients in the calculation of WGPA. FF grade is given to students who fail the course in question. Student who takes FF grade must meet conditions dealing with attending and exam by taking this course in the first semester or year. Success grade of courses, referred to as M and G isn’t included in the calculation of WGPA.
Students who graduate Vocational high-school are admitted to Atatürk University Erzurum Vocational College without exam but students who graduate other high-schools are admitted according to the result of examination which is performed by selection and Placement Center of higher-education and these students must get type 1-point sufficiently and they must have special requirements. Also , students are admitted to the programs through horizontal transfer. These transitions are regulated by an instruction students can make transition under the number and transition conditions which were pre-announced before and they can realize this procedure between diploma programs of different higher-education foundations or diploma programs within the same higher-education.