Yeterlilik Kodu | TR0030005335 | |
Yeterlilik Adı | Elektronik Teknolojisi Ön Lisans Diploması | |
Sorumlu Kurum | Muğla Sıtkı Koçman Üniversitesi | |
Sorumlu Kurum İletişim Bilgisi | Muğla Sıtkı Koçman Üniversitesi, 48000 Kötekli/Muğla | |
Sorumlu Kurum URL | http://www.mu.edu.tr/ | |
Yönelim | - | |
AYÇ Seviyesi | 5 | Yeterlilik TYÇ’ye yerleştirilmemiştir. |
TYÇ Seviyesi | 5 | |
Sınıflandırma (Tematik Alan) | Elektrik ve enerji | |
Sınıflandırma (Meslek Kodu) | - | |
Kategori | - | |
Kredi Değeri | - | |
Programın Normal Süresi | - | |
Program Profili (Amaç) | - | |
Öğrenme Ortamları | - | |
Öğrenme Kazanımları (Tanım) |
| |
Anahtar Yetkinlikler | - | |
Ölçme ve Değerlendirme Yöntemleri | Bu program İKMEP kapsamındadır. Verilen her bir ders için en az bir ara sınav ve dönem sonu sınavı yapılır. Ayrıca kısa sınav ve ödev değerlendirmesi de yapılabilir. Başarı notuna ara sınav, kısa süreli sınav ve ödevlerin etkisi %40, dönem sonu sınavının ise %60 oranındadır. Bu değerlendirmede; dersin öğretim elemanı, dersi alan öğrencilerin yarıyıl içi ve yarıyıl sonu sınavlarından aldıkları puanların istatistiksel sonuçlarını dikkate alır ve alınan notlar yönetmelikte belirlenen esaslar çerçevesinde 4’lü harf sistemine dönüştürülür. Bir dersten AA, BA, BB, CB ve CC notlarından birini alan öğrenci o dersi başarmış sayılır. Bir dersten alınan DC ve DD notları, öğrencinin mezuniyet AGNO’suna bağlı olarak değerlendirilir. Öğrencinin AGNO’su başarı baraj notunun (2,00) üzerinde ise bu dersler başarılı olarak tanımlanır. Ara yarıyıllarda/yıllarda ise, AGNO hesaplanmasında bu harf notları katsayıları ile değerlendirilir. FF notu alan öğrenci başarısızdır, bu dersi verildiği ilk yarıyılda/yılda alarak devam ve sınav şartlarını yerine getirmek zorundadır. Başarı notu MM ve GG ile takdir edilen dersler, AGNO hesaplanmasında değerlendirmeye katılmaz. Her öğrenci derslere, uygulamalara, laboratuvarı, proje, seminer, atölye, dönem içi çalışmaları, mezuniyet projelerine katılmak zorundadır. Teorik derslerin en az % 70 ve uygulamalı ve laboratuvarı çalışmalarının ise en az % 80 katılmayan öğrencilerin o derslerden final sınavlarına girmelerine izin verilmez. Öğrenciler teorik derslerde devam koşulunu yerine getirene kadar ilgili dersi tekrar etmek zorundadır. Sınavlar genellikle yazılı olarak yapılır. Ancak, öğretim elemanı sözlü sınav yapılmasına da karar verebilir. Derslerin içeriğine göre, bilgi formu üzerinde belirtilmek şartıyla öğrenciler proje çalışmasına da yönlendirilebilir.Alanında ön lisans derecesi elde edebilmek için öğrencilerin programda alması gereken zorunlu ve seçimlik derslerin (toplam 120 AKTS karşılığı) tümünü başarıyla tamamlamak ve genel not ortalamasının 4.00 üzerinden en az 2.0 ağırlıklı not ortalaması elde etmesi gerekir. | |
Kalite Güvencesi | - | |
Giriş Şartı | Yükseköğretime Öğrenci kabulü için ülke çapında yapılan Yüksek Öğretime Geçiş Sınavı (YGS) girmiş olması veya sınavsız geçiş sınavına başvuru yapmak zorundadır. Yüksek Öğretime Geçiş Sınavı (YGS) yılda bir kez Öğrenci Seçme ve Yerleştirme Merkezi (ÖSYM) tarafından yapılmaktadır. Öğrenci Yüksek Öğretime Geçiş Sınavı (YGS)’den alınan puan ve lise not ortalamalarına göre Yüksek Öğretim kurumlarındaki bölümlere yerleştirilir. Meslek Lisesi mezunları sınavsız geçiş haklarını kullanarak Elektronik Teknolojisi Programına ÖSYM tarafından belirlenen şekilde kayıt yaptırabilirler. | |
Başarma Şartları | Alanında ön lisans derecesi elde edebilmek için öğrencilerin programda alması gereken zorunlu ve seçimlik derslerin (toplam 120 AKTS karşılığı) tümünü başarıyla tamamlamak ve genel not ortalamasının 4.00 üzerinden en az 2.0 ağırlıklı not ortalaması elde etmesi gerekir.Programı başarıyla tamamlamak için programda mevcut olan derslerin tümünü geçmek, 4.00 üzerinden en az 2.0 ağırlıklı not ortalaması elde etmek ve gerekmektedir | |
İlerleme Yolları (İlişki Türü) | Mezun öğrenciler elektronik ve fabrika arıza / bakım, devlet kuruluşları, elektronik güvenlik şirketleri, PLC ve mikrodenetleyici programlama sektörlerinde istihdam edilmektedir. | |
Yasal Dayanağı | - | |
Geçerlilik Süresi (Varsa) | Yeterlilik sürekli geçerlidir | |
Yeterliliğe Erişim için İnternet Adresi | Adresi Aç |
TR0030005335
- Elektronik Teknolojilerinde kullanılan devre elemanların çalışma prensiplerinin teorisini anlayabilecek kuramsal bilgilere sahiptir.
- Elektronik ve temel elektrik elemanlarını ve kullanım yerlerini bilir.
- Elektronik sistemlerde kullanılan parçaların çalışma prensiplerini bilir.
- Alanında edindiği temel düzeydeki bilgileri, günlük yaşamda kullanılan elektronik cihazların çalışma prensiplerini, mimarilerini ve meydana gelebilecek arızaları giderebilme alanlarında kullanabilir.
- Elektronik devre tasarımını (Teknik çizimini) bilgisayar ortamında gerçekleştirebilir.
- Elektronik devre kartının üretimini gerçekleştirebilir, kontrolünü yapabilir.
- Bireysel çalışabileceği gibi ekip üyesi olarak sorumluluk alır.
- Elektronik devre bilgisayar benzetim programlarını kullanır.
- Elektronik cihazlarda meydana gelebilecek arızaları tespit edebilir.
- Mesleğinin gerektirdiği yerlerde ölçüm aletlerini kullanabilir ve ek eğitimle diğer ölçüm aletlerini kullanabilecek uygulamalı bilgilere sahiptir.
- Elektronik devre üreticilerinin ürünlerinin teknik özelliklerini anlayabilecek ve meslektaşları ile iletişim kurabilecek seviyede yabancı dile hâkimdir.
- Çevre koruma, iş sağlığı, güvenlik bilincine ve Meslek etiği değerlerine sahiptir.
- Bilgisayar ortamında güncel teknolojileri takip edebilecek bilgi seviyesine sahiptir.
- Başta bilgisayar olmak üzere bilişim ve iletişim teknolojilerini mesleğinin hemen her alanında kullanabilir, bilgilerini yaşam boyu öğrenme bilinci ile güncel tutabilir.
Bu program İKMEP kapsamındadır. Verilen her bir ders için en az bir ara sınav ve dönem sonu sınavı yapılır. Ayrıca kısa sınav ve ödev değerlendirmesi de yapılabilir. Başarı notuna ara sınav, kısa süreli sınav ve ödevlerin etkisi %40, dönem sonu sınavının ise %60 oranındadır. Bu değerlendirmede; dersin öğretim elemanı, dersi alan öğrencilerin yarıyıl içi ve yarıyıl sonu sınavlarından aldıkları puanların istatistiksel sonuçlarını dikkate alır ve alınan notlar yönetmelikte belirlenen esaslar çerçevesinde 4’lü harf sistemine dönüştürülür. Bir dersten AA, BA, BB, CB ve CC notlarından birini alan öğrenci o dersi başarmış sayılır. Bir dersten alınan DC ve DD notları, öğrencinin mezuniyet AGNO’suna bağlı olarak değerlendirilir. Öğrencinin AGNO’su başarı baraj notunun (2,00) üzerinde ise bu dersler başarılı olarak tanımlanır. Ara yarıyıllarda/yıllarda ise, AGNO hesaplanmasında bu harf notları katsayıları ile değerlendirilir. FF notu alan öğrenci başarısızdır, bu dersi verildiği ilk yarıyılda/yılda alarak devam ve sınav şartlarını yerine getirmek zorundadır. Başarı notu MM ve GG ile takdir edilen dersler, AGNO hesaplanmasında değerlendirmeye katılmaz. Her öğrenci derslere, uygulamalara, laboratuvarı, proje, seminer, atölye, dönem içi çalışmaları, mezuniyet projelerine katılmak zorundadır. Teorik derslerin en az % 70 ve uygulamalı ve laboratuvarı çalışmalarının ise en az % 80 katılmayan öğrencilerin o derslerden final sınavlarına girmelerine izin verilmez. Öğrenciler teorik derslerde devam koşulunu yerine getirene kadar ilgili dersi tekrar etmek zorundadır. Sınavlar genellikle yazılı olarak yapılır. Ancak, öğretim elemanı sözlü sınav yapılmasına da karar verebilir. Derslerin içeriğine göre, bilgi formu üzerinde belirtilmek şartıyla öğrenciler proje çalışmasına da yönlendirilebilir.Alanında ön lisans derecesi elde edebilmek için öğrencilerin programda alması gereken zorunlu ve seçimlik derslerin (toplam 120 AKTS karşılığı) tümünü başarıyla tamamlamak ve genel not ortalamasının 4.00 üzerinden en az 2.0 ağırlıklı not ortalaması elde etmesi gerekir.
Yükseköğretime Öğrenci kabulü için ülke çapında yapılan Yüksek Öğretime Geçiş Sınavı (YGS) girmiş olması veya sınavsız geçiş sınavına başvuru yapmak zorundadır. Yüksek Öğretime Geçiş Sınavı (YGS) yılda bir kez Öğrenci Seçme ve Yerleştirme Merkezi (ÖSYM) tarafından yapılmaktadır. Öğrenci Yüksek Öğretime Geçiş Sınavı (YGS)’den alınan puan ve lise not ortalamalarına göre Yüksek Öğretim kurumlarındaki bölümlere yerleştirilir. Meslek Lisesi mezunları sınavsız geçiş haklarını kullanarak Elektronik Teknolojisi Programına ÖSYM tarafından belirlenen şekilde kayıt yaptırabilirler.
Mezun öğrenciler elektronik ve fabrika arıza / bakım, devlet kuruluşları, elektronik güvenlik şirketleri, PLC ve mikrodenetleyici programlama sektörlerinde istihdam edilmektedir.
Yeterlilik sürekli geçerlidir
Qualification Code | TR0030005335 | |
Qualification Title | Electronics Technology Associate Degree | |
Awarding Body | Mugla Sıtkı Koçman University | |
Awarding Body Contact | Muğla Sıtkı Koçman University 48000 Kötekli/Muğla | |
Awarding Body Url | http://www.mu.edu.tr/ | |
Orientation | - | |
EQF Level | 5 | The Qualification hasn't been included in TQF. |
TQF Level | 5 | |
Thematic Areas | Electricity and energy | |
National Occupation Classification | - | |
Category | - | |
Credit Value | - | |
Program Duration | - | |
Program Profile | - | |
Learning Environments | - | |
Description |
| |
Key Competencies | - | |
Further Info | At least one midterm exam and a final exam are performed for each course given. Quizzes and assignments can also be assessed. The success grade is assessed by midterm exam, short-term exam and homework are 40% and final exam is 60%. In this assessment, the course instructor takes into account the statistical results of the scores of the students taking the courses from the midterm and final exams and the notes taken are converted to a 4-letter system within the framework of the regulations. A student who receives one of the grades AA, BA, BB, CB and CC grades is considered successful. The DC and DD grades taken from a course are evaluated according to the graduate weighted average grade of the student. If the weighted grade point average of the student is above the success grade (2.00), these courses are defined as successful. In the interim years / years, this letter grade is evaluated by the coefficients in the calculation of the weighted general grade averages. The student who receives the FF grade is unsuccessful. Every student has to attend classes, practice, laboratory, project, seminar, workshop, semester work, graduation projects. Students who are not enrolled in at least 70% of the theoretical courses and at least 80% of the practical and laboratory studies are not allowed to take the final exams from those courses. Students have to repeat the relevant lessons until they fulfil the attendance requirement in the theoretical courses. Examinations are usually performed as writing. However, the teaching staff may also decide to perform an oral examination. According to the content of the courses, Students can be directed to the project study provided that they are indicated on the information form. Students who want to enroll in the Electronic Technology Programme are required to complete the secondary education programme. Students who graduated from high school must be graduated from the secondary education program determined by the Higher Education Institution in order to pass without examination. There is no limit to the maximum duration of study in order to obtain a pre-bachelor degree. | |
Quality Assurance | - | |
Access Requirements | The students admission to Higher Education is based on a nation-wide Student Selection Examination (YGS). The examination is held once in a year and administered by the Student Selection and Placement Center (ÖSYM). The candidates are registered to Higher Education Institutions according to their examination scores and their high school grade point averages. | |
Conditions for Success | Students who want to enroll in the Electronic Technology Programme are required to complete the secondary education programme. Students who graduated from high school must be graduated from the secondary education program determined by the Higher Education Institution in order to pass without examination. There is no limit to the maximum duration of study in order to obtain a pre-bachelor degree. To succeed in the programme, the students should complete successfully all courses (optional and compulsory) and average grade must be 2.0 out of 4. | |
Progression Paths (Relationship Type) | The graduated students may be employed in electronics and factory fault/maintenance, government institutions, electronic security companies, PLC and microcontroller programming sectors. | |
Legal Basis | - | |
Validity Period (If Any) | Qualification is continuous | |
Url | Open Address |
TR0030005335
- Students have the theoretical knowledge that can understand the theory of working principles of circuit elements used in electronic technologies.
- They know electronic and basic electrical elements and usage places.
- They know the working principles of parts used in electronic systems.
- They can be used the basic knowledge acquired in the field, working principles of electronic devices used in everyday life, architects and areas where faults can occur.
- They can make electronic circuit design (technical drawing) in computer environment.
- They can make the production of the electronic circuit board and control.
- They take responsibility as a team member as well as individually.
- They use electronic circuit computer simulation programs.
- They can identify defects that may occur in electronic devices.
- They can use measuring instruments in places where your profession requires and have practical knowledge to use additional measuring instruments with additional training.
- They are able to understand the technical features of the products of the electronic circuit manufacturers and communicate with their colleagues in a foreign language.
- They have the values of environmental protection, occupational health, safety consciousness and professional ethics.
- They have a level of knowledge that can follow the current technology in computer environment.
- They can use information and communication technologies, especially computers, in almost all fields of the profession, and keep their knowledge updated with lifelong learning consciousness.
At least one midterm exam and a final exam are performed for each course given. Quizzes and assignments can also be assessed. The success grade is assessed by midterm exam, short-term exam and homework are 40% and final exam is 60%. In this assessment, the course instructor takes into account the statistical results of the scores of the students taking the courses from the midterm and final exams and the notes taken are converted to a 4-letter system within the framework of the regulations. A student who receives one of the grades AA, BA, BB, CB and CC grades is considered successful. The DC and DD grades taken from a course are evaluated according to the graduate weighted average grade of the student. If the weighted grade point average of the student is above the success grade (2.00), these courses are defined as successful. In the interim years / years, this letter grade is evaluated by the coefficients in the calculation of the weighted general grade averages. The student who receives the FF grade is unsuccessful. Every student has to attend classes, practice, laboratory, project, seminar, workshop, semester work, graduation projects. Students who are not enrolled in at least 70% of the theoretical courses and at least 80% of the practical and laboratory studies are not allowed to take the final exams from those courses. Students have to repeat the relevant lessons until they fulfil the attendance requirement in the theoretical courses. Examinations are usually performed as writing. However, the teaching staff may also decide to perform an oral examination. According to the content of the courses, Students can be directed to the project study provided that they are indicated on the information form. Students who want to enroll in the Electronic Technology Programme are required to complete the secondary education programme. Students who graduated from high school must be graduated from the secondary education program determined by the Higher Education Institution in order to pass without examination. There is no limit to the maximum duration of study in order to obtain a pre-bachelor degree.
The students admission to Higher Education is based on a nation-wide Student Selection Examination (YGS). The examination is held once in a year and administered by the Student Selection and Placement Center (ÖSYM). The candidates are registered to Higher Education Institutions according to their examination scores and their high school grade point averages.
The graduated students may be employed in electronics and factory fault/maintenance, government institutions, electronic security companies, PLC and microcontroller programming sectors.
Qualification is continuous