| Yeterlilik Kodu | TR0030035463 | |
| Yeterlilik Adı | Elektrik Ön Lisans Diploması | |
| Sorumlu Kurum | Sakarya Uygulamalı Bilimler Üniversitesi | |
| Sorumlu Kurum İletişim Bilgisi | Sakarya Uygulamalı Bilimler Üniversitesi 54050 Serdivan/SAKARYA | |
| Sorumlu Kurum URL | https://www.subu.edu.tr/tr | |
| Yönelim | Mesleki | |
| AYÇ Seviyesi | 5 | Yeterlilik TYÇ’ye yerleştirilmemiştir. |
| TYÇ Seviyesi | 5 | |
| Sınıflandırma (Tematik Alan) | Elektrik ve enerji | |
| Sınıflandırma (Meslek Kodu) |
ISCO 08 | |
| Kategori | Ana | |
| Kredi Değeri | 120 | |
| Programın Normal Süresi | 2 | |
| Program Profili (Amaç) | - | |
| Öğrenme Ortamları | - | |
| Öğrenme Kazanımları (Tanım) |
| |
| Anahtar Yetkinlikler | - | |
| Ölçme ve Değerlendirme Yöntemleri | - | |
| Kalite Güvencesi | - | |
| Giriş Şartı | - | |
| Başarma Şartları | Elektrik Programından mezun olabilmek için, programda mevcut olan her ders için gerekli geçme notunu almış olmalıdır. 30 iş günü stajını ve 3+1 İşyeri uygulaması eğitimini tamamlamış olmalıdır. Not ortalamasının 4,00 üzerinden en az 2,00 olmadır. 120 AKTS kredisini başarıyla tamamlanmış olması gerekmektedir. Ayrıca, Öğrencilerin teorik derslere % 70, uygulamalı derslere % 80 oranında devamları zorunludur. | |
| İlerleme Yolları (İlişki Türü) | Elektrik Tesisat, Otomasyon ve kumanda konusunda kendi işyerini açabilir. Kamu kurum ve kuruluşlarında elektrik teknikeri olarak çalışabilir. Özel Sektörde yurt içi ve yurt dışında atölye ve fabrikalarında elektrik teknikeri olarak çalışabilir. | |
| Yasal Dayanağı | - | |
| Geçerlilik Süresi (Varsa) | - | |
| Yeterliliğe Erişim için İnternet Adresi | Adresi Aç | |
TR0030035463
ISCO 08
ISCO 08
- Teknik resmi çizmeyi ve okumayı bilir.
- Temel düzeyde bilgi kodlama prensiplerini bilir.
- Elektrik Devrelerinin temel prensiplerini bilir ve hesaplamalarını yapar.
- Elektrik malzemelerini tanır.
- Elektrik Makinelerinin yapılarını ve çalışmalarını bilir.
- Elektronik devrelerini ve çalışma prensiplerini tanır.
- Elektrik Kumanda devrelerini tanır ve kurulumunu yapar ve çalıştırır.
- Elektrik tesisat, projelendirmeyi ve çizimlerini yönetmeliklere uygun şekilde yapar.
- Otomasyon sistemleri konusunda temel seviyeye sahiptir.
- PLC cihazlarını temel seviyede programlama ve kullanma becerisine sahiptir.
- Elektronik devrelerini ve görevlerini tanır.
- Kumanda devrelerinin prensiplerini bilir ve uygulamalarını yapar.
- Elektrik ve oksi asetilen kaynağı bilir ve uygular.
- Otomatik kontrol elamanlarını tanır.
- Gaz yakacakları ve brülörleri bilir.
Elektrik Tesisat, Otomasyon ve kumanda konusunda kendi işyerini açabilir. Kamu kurum ve kuruluşlarında elektrik teknikeri olarak çalışabilir. Özel Sektörde yurt içi ve yurt dışında atölye ve fabrikalarında elektrik teknikeri olarak çalışabilir.
| Qualification Code | TR0030035463 | |
| Qualification Title | Elektrik Ön Lisans Diploması | |
| Awarding Body | Sakarya University of Applied Sciences | |
| Awarding Body Contact | Sakarya University of Applied Sciences, 54050 Serdivan /Sakarya | |
| Awarding Body Url | https://www.subu.edu.tr/en | |
| Orientation | Occupational | |
| EQF Level | 5 | The Qualification hasn't been included in TQF. |
| TQF Level | 5 | |
| Thematic Areas | Electricity and energy | |
| National Occupation Classification |
ISCO 08 | |
| Category | Main | |
| Credit Value | 120 | |
| Program Duration | 2 | |
| Program Profile | - | |
| Learning Environments | - | |
| Description | -Knows how to draw and read the technical drawing -Knows basic knowledge coding principles. -Knows the principles of Electric Circuits. -Knows the electical materials. -Knows the principles of electrical machines and applicate. -Knows the principles of installation plan and drawing. -Knows and apply principles of electirc command circuits. -Knows and apply principles of otomation circuit. -Knows the principles of electronic circuits | |
| Key Competencies | - | |
| Further Info | 1) Measurement and Evaluation;Sakarya University of Applied Sciences, Bachelor and Associate Degree Education and Examination Regulation.According to the relevant regulation, a student's success grade; It consists of the contribution of the semester grade and the final grade of that course at certain rates.Contribution of the evaluations within the term to the success grade cannot be less than 40% and more than 70%.Students with an absolute grade below 40% are considered unsuccessful.Considering the success level of the class, the statistical distribution of the grades and the class average, the success grades are determined by the Sakarya University of Applied Sciences Relative Evaluation Directive. (2) The meanings of the letter grades are as follows: a) A student who gets AA, BA, BB, CB and CC grades from a course is considered successful in that course. b) DC and DD grades taken from a course indicate that this course was "conditionally" achieved. c) The grade of FF indicates that the student has failed the course. ç) DZ grade is given to students who do not fulfill the attendance obligations or who fail because they do not meet the requirements for course practices.DZ grade is treated as FF grade in the calculation of grade point averages. d) GR grade is given to students who do not take the final exam, regardless of their work in the semester.GR grade is treated as FF grade in the calculation of grade point averages. e)The grade of MU is given to students who transfer horizontally / vertically to undergraduate and associate degree departments / programs of the University, or to the equivalents of the courses they have been successful in any higher education institution they have attended before, and to those who have passed the exemption exam. MU grade is not included in grade point averages. f) YT grade is given as the success grade of the courses that are not included in the average and succeeded. g) YZ grade is given as the success grade of the courses that are not included in the average and which are not achieved. | |
| Quality Assurance | - | |
| Access Requirements | Students are admitted to the Gas and Installation Technology Program through the university entrance exam administered by ÖSYM. Students can make a choice with their TYT scores. | |
| Conditions for Success | In order to graduate from the Gas and Installation Technology technologies program, they must have the required passing grade for each course in the program. Must have completed 30 working days of internship and 3 + 1 internship. GPA must be at least 2.00 out of 4.00. It must have successfully completed 120 ECTS credits. In addition, students must attend 70% of theoretical courses and 80% of applied courses. | |
| Progression Paths (Relationship Type) | - They can open their own workplaces in the electrical installation sector. - They can work as technical staff in public institutions and organizations. - They can work in workplaces that perform all kinds of command installations, electric motor montaging, maintenance, repair, repair and service operations. | |
| Legal Basis | - | |
| Validity Period (If Any) | - | |
| Url | Open Address | |
TR0030035463
ISCO 08
ISCO 08
-Knows how to draw and read the technical drawing -Knows basic knowledge coding principles. -Knows the principles of Electric Circuits. -Knows the electical materials. -Knows the principles of electrical machines and applicate. -Knows the principles of installation plan and drawing. -Knows and apply principles of electirc command circuits. -Knows and apply principles of otomation circuit. -Knows the principles of electronic circuits
1) Measurement and Evaluation;Sakarya University of Applied Sciences, Bachelor and Associate Degree Education and Examination Regulation.According to the relevant regulation, a student's success grade; It consists of the contribution of the semester grade and the final grade of that course at certain rates.Contribution of the evaluations within the term to the success grade cannot be less than 40% and more than 70%.Students with an absolute grade below 40% are considered unsuccessful.Considering the success level of the class, the statistical distribution of the grades and the class average, the success grades are determined by the Sakarya University of Applied Sciences Relative Evaluation Directive. (2) The meanings of the letter grades are as follows: a) A student who gets AA, BA, BB, CB and CC grades from a course is considered successful in that course. b) DC and DD grades taken from a course indicate that this course was "conditionally" achieved. c) The grade of FF indicates that the student has failed the course. ç) DZ grade is given to students who do not fulfill the attendance obligations or who fail because they do not meet the requirements for course practices.DZ grade is treated as FF grade in the calculation of grade point averages. d) GR grade is given to students who do not take the final exam, regardless of their work in the semester.GR grade is treated as FF grade in the calculation of grade point averages. e)The grade of MU is given to students who transfer horizontally / vertically to undergraduate and associate degree departments / programs of the University, or to the equivalents of the courses they have been successful in any higher education institution they have attended before, and to those who have passed the exemption exam. MU grade is not included in grade point averages. f) YT grade is given as the success grade of the courses that are not included in the average and succeeded. g) YZ grade is given as the success grade of the courses that are not included in the average and which are not achieved.
Students are admitted to the Gas and Installation Technology Program through the university entrance exam administered by ÖSYM. Students can make a choice with their TYT scores.
- They can open their own workplaces in the electrical installation sector. - They can work as technical staff in public institutions and organizations. - They can work in workplaces that perform all kinds of command installations, electric motor montaging, maintenance, repair, repair and service operations.